HSGQ-F881 at a glance
Figures from HSGQ's product page for the F881.
| Specification | HSGQ-F881 |
|---|---|
| Wi-Fi | Wi-Fi 6, AX3000 dual band |
| Wireless rates | 574 Mbps at 2.4 GHz, 2,402 Mbps at 5 GHz (160 MHz channels) |
| Ethernet ports | 1 × gigabit, 1 × 2.5 gigabit |
| Fibre side | GPON and EPON, selected automatically |
| Power | Power over Fibre at 48 to 57 V, or a 12 V / 1.5 A DC adapter; under 12 W |
| PoF distance | Up to 300 m from the PoF router |
| Management | Through the OLT (OMCI), TR-069, local console or cloud; smart roaming |
| Mounting | Ceiling; 188 × 180 × 43 mm |
| Operating temperature | -10 to 50 °C |
What fibre-to-the-room (FTTR) means
In a normal FTTH install, fibre stops at one ONU and Wi-Fi spreads from there, struggling through walls. FTTR carries fibre on to each room, where an AP like the F881 turns it into Wi-Fi and Ethernet. HSGQ's chain is OLT, then a central PoF router (such as the HSGQ-F32R), then optical-electric hybrid cable, then an F881 in each room.
The hybrid cable carries both the fibre and the power, so each ceiling AP needs no socket of its own. Because every room gets its own fibre-fed AP, coverage and speed stay even across the building, and devices roam between rooms.
Where an HSGQ ceiling access point fits
- Hotels, serviced apartments and hostels with one AP per room or corridor
- Apartment blocks where an ISP already runs HSGQ GPON
- Offices, clinics and schools where running Cat6 to every ceiling is hard
- New buildings designed with fibre to each floor from the start
What it is not: a standard PoE access point
HSGQ warns against assuming the F881 works with a standard PoE switch. It expects Power over Fibre from an HSGQ PoF router, or a local 12 V adapter. If your building is wired with Ethernet and a PoE switch, a conventional PoE access point will be simpler and cheaper.
For Ethernet networks, the ECA Networks store stocks PoE access points including the TP-Link EAP225, Ubiquiti UniFi AP AC Lite and AC Pro, Ruijie RG-AP820-L and MikroTik wAP, plus Comfast outdoor Wi-Fi 7 APs.
HSGQ Wi-Fi without FTTR
For a single home on an HSGQ GPON network, the usual answer is an ONU with built-in Wi-Fi rather than a separate access point. The HSGQ X100W3 XPON ONU, with one gigabit port and 2.4 GHz Wi-Fi 4, is listed on the ECA Networks store at KES 1,800 (November 2026).
Planning an FTTR install
Count the rooms and corridors that need coverage, keep each AP within 300 m of the PoF router, and check that the optical power at each AP sits inside its receive range (-7 to -28 dBm on GPON). Plan the 2.5 gigabit port for a wired device such as a smart TV or a desk in each room. The technical desk can check a floor plan and size the PoF router, hybrid cable and APs together.