Orders confirmed before 2pm leave Nairobi the same working day.Get a quote →

All guides

Networking Gear & MikroTik · 6 min read

GPON OLT Stick: When a Plug-In SFP+ OLT Beats a Full OLT

By the ECA Networks technical desk · Last updated 12 November 2026

Small ISPs often need fibre to one building long before they can justify a rack-mounted OLT. The OLT stick fills that gap. Here is what HSGQ's version does, what it does not do, and when to step up to a full OLT.

Short answer

An OLT stick is a one-port GPON OLT built into an SFP+ module that plugs into a switch or router, so a small ISP can light one building without a full OLT. HSGQ's version serves up to 32 ONUs over as far as 8 km. Past 32 subscribers or 8 km, a chassis OLT such as the 4-port HSGQ G04R is the better buy.

What an OLT stick is

A normal OLT is a rack-mounted box with several PON ports. An OLT stick shrinks one PON port into a module the size of an SFP transceiver. Plug it into a compatible SFP+ slot, connect a splitter, and it serves ONUs exactly like a port on a full OLT.

HSGQ GPON OLT stick: published specifications

These figures are from HSGQ's own product page for its GPON Stick OLT. Confirm the exact model and firmware with the technical desk before ordering.

SpecificationHSGQ GPON OLT stick
PON typeGPON only (not EPON or XGS-PON)
PON ports1
Optical classClass B+
Split ratio and ONUsUp to 1:32; 16 or 32 ONUs depending on configuration
Bandwidth2.488 Gbps down, 1.244 Gbps up
ReachUp to 8 km on single-mode fibre
Connector and form factorSC, in an SFP+ module; hot-swappable
ManagementWeb interface; ONU auto-registration; batch ONU upgrade of up to 5 devices
PowerUnder 3 W
Operating temperature-10 to 40 °C

What you need around it

  • A switch, router or firewall with an SFP+ slot that supports the stick. HSGQ describes it as working with compatible third-party devices, so test it in your host before a rollout.
  • A router handling subscriber login and bandwidth plans, such as a MikroTik running PPPoE
  • Splitters, fibre and closures to reach the homes
  • GPON or XPON ONUs for each subscriber, such as the HSGQ X100 (KES 1,100) or the X100W3 with Wi-Fi (KES 1,800) on the ECA Networks store

Check the power budget first

Class B+ gives 28 dB between the stick and each ONU. A worked example for a single block on a 1:32 split:

ItemLoss
1:32 splitterAbout 17 dB
3 km of fibre at about 0.35 dB/kmAbout 1.1 dB
4 connectors at about 0.3 dBAbout 1.2 dB
6 fusion splices at about 0.05 dBAbout 0.3 dB
Total, leaving about 8 dB of marginAbout 19.6 dB

OLT stick vs chassis OLT

HSGQ GPON OLT stickHSGQ G04R (4 ports)HSGQ G08R (8 ports)
PON ports148
Splitter networks (PON trees)1, up to 32 ONUs48
Price on the ECA store (Nov 2026)Ask the technical deskKES 75,000KES 120,000
Best forOne building, estate or pilotSmall ISP growing past one areaISP serving several areas

Mind the heat

The stick is rated to 40 °C, and an SFP+ cage inside a closed cabinet can run hotter than the room. Install the host switch in a ventilated cabinet, leave the neighbouring slot empty if you can, and avoid sealed boxes in direct sun.

When to choose the stick, and when to grow out of it

Choose the stick to light a single apartment block, a gated estate, a campus building or a pilot area, or to add one PON tree to a site that already has a suitable switch. Move to a chassis OLT when you pass 32 subscribers on one tree, need more than one PON tree, need reach beyond 8 km, or want the fuller management of a dedicated OLT. For help sizing either, see our GPON OLT buying guide or ask the technical desk.

Frequently asked questions

What is an OLT stick?+

A one-port GPON OLT built into an SFP+ module. It plugs into a compatible switch or router and serves ONUs through a splitter, like one port of a full OLT.

How many users can an OLT stick support?+

HSGQ's GPON OLT stick supports up to a 1:32 split, which is up to 32 ONUs, or 16 depending on configuration.

Does the HSGQ OLT stick work with EPON ONUs?+

HSGQ describes it as GPON only. Use GPON or XPON ONUs that support GPON mode.

Will it work in a MikroTik switch?+

HSGQ lists compatibility with suitable third-party switches and routers but does not name models. Ask the technical desk, and test in your exact switch before deploying.

Ready to spec the equipment?

Browse stocked hardware on the ECA Networks shop, or send us the spec for a quote.

Browse the shop

Related reading

Networking Gear & MikroTik

MikroTik Router Configuration for Small Business: Step-by-Step Setup Guide (2026)

Read guide

Networking Gear & MikroTik

Best Router for 50+ Users in a Kenyan Office: MikroTik hAP vs CCR Compared

Read guide

Networking Gear & MikroTik

GPON OLT Buying Guide: Sizing Ports to Subscriber Capacity

Read guide

Need help with the specification?

Send the drawing, quantities or site notes. The technical desk will check the parts before you order.